motion control software programs

This software is offered Free, and is designed to demonstrate simple parameter setup and index functions. During the development stage it is useful as a tool for tuning speeds and your hardware. These are NOT user applications. You will probably require custom software design for your specific application if it needs an interface with another computer.

The SIN-10 and EASI programs do permit download of your "command" files for stand alone applications. One useful function is the ability to plot a complete index and report acceleration, slew, and deceleration times and distances.

SIN-10 Serial Demo Program (Visual Basic).
Use with Windows 95 through Windows 2000 and Windows NT.
(Requires a SIN-10 serial adapter from AMS).

Download

EASI v1.24
EASI is a versatile DOS based program for developing motion control applications with AMS products. It includes source code written in Microsoft "C" and a Quick Basic example. This is a good program for demonstrating step motor controller commands and operates with most Windows^Ž based PC systems. Click below for instructions on using EASI with Windows^ŽXP.

Download EASI124D (zip)
Download C code (zip) example
Download Quick basic (zip) example
Instructions for using EASI with Windows^ŽXP

IBC-400 note - Only dumb terminal or RS-232 daisy chain (with one axis) are implemented. New Windows programs are under development.

T4W Terminal for Windows
Development software for use with Windows^Ž operating systems.

T4W Documentation (pdf)

Torque/Speed Conversion
Easily convert torque and speed parameters, i.e., SPS to RPM, oz/in to Kg-Cm, etc.